Heat press with multifunction manual operation, which allows printing on balloons, caps and planes. Electronic time and temperature control.
Possibility of having the accessory to print on the caps, the heated plate 38 x 38 cm or 15 x 15 cm or the accessory to print on the balloons.
-
Accessory for 14 x 8 cm cap (optional):
- Manual heat transfer press, with curved top plate that allows easy printing of transfers on caps.
- Equipped with a locking device which ensures that the transfer and the fabric are maintained during printing.
Heating plate 38 x 38cm / 15 x 15cm (optional):
- Manual heat press, the top plate is not rigidly attached, but will automatically adjust to ensure even pressure between the two platens.
- Interchangeable quick-screw lower plate.
Accessory for balloons (optional):
- Adjustable curved plate, which allows printing on balloons in different sizes, combined with flat heating plates of 15 x 15 cm.
Download the brochure
Brochure TMH19
POWER SUPPLY |
|
AVERAGE ENERGY CONSUMPTION
|
|
|
|
|
|
|
|
|
999.9 seconds (approximately 16 min)
|